The Schwartzkopff Torpedo

HNSA Crest with photos of visitors at the ships.

Plates.

PLATE I.
SCHWARTZKOPFF TORPEDO.

1. War nose.
2. War head.
3. Immersion chamber.
4. Air flask.

5. Engine room
6. After body.
7. Bevel gear box.
8. Tail.

PLATE II.
WAR HEAD WITH WAR NOSE.

1. War nose body.
2. Firing pin and striker.
3. Safety pin.
4. Forward exploder.
5. Inner exploder holder.
6. Primer case.

7. Primer case pocket.
8. Charge of wet gun-cotton.
9. After bulkhead.
10. Moisture tap.
11. Immersion chamber.

PLATE III.
EXERCISE HEAD WITH NOSE.

1. Exercise nose.
2. Lead ballast rings.
3. Filling hole.
4. Trimming tank

5. Vent hole and plug.
6. Filling. hole and plug.
7. Rubber washer under bulkhead.
8. Immersion chamber.

PLATE IV.
WAR NOSE.

1. Firing pin and striker.
2. Shearing disc.
3. Shearing disc rut.
4. Safety pin.
5. Bronze disc.
6. Forward exploder.
7. War nose body.

8. Primer case base.
9. Inner exploder nut.
10. Copper disc.
11. Inner exploder.
12. Primer case.
13. Primer case pocket.
14. EXERCISE NOSE.

PLATE V.
IMMERSION CHAMBER.

1. Double spring rod.
2. Cross lever.
3. Pendulum rod brackets.
4. Pendulum.
5. Spring buffers.
6. Pendulum rod.
7. Connecting rod.
8. Connecting rod hanger.
9. Rock shaft.
10. Connecting rod hanger screw.
11. Testing lever.
12. Testing lever bracket.
13. Copper diaphragm.

14. Copper diaphragm clamping ring.
15. Hydrostatic piston.
16. Hydrostatic piston box.
17. Hydrostatic piston spindle.
18. Hydrostatic piston spindle bracket.
19. Hydrostatic piston springs.
20. Gear spindle.
21. Adjusting spur gears.
22. Adjusting bevel gears.
23. Gear spindle brackets.
24. Adjusting spindle.
25. Adjusting spindle brackets.
26. Depth index.

PLATE VI.
STEERING ENGINE.

1. Bell crank pivot eye.
2. Locking spool.
3. Locking spool holding plate.
4. Slide valve rod.
5. Slide valve rod securing nut.
6. Valve adjusting screw securing nut.
7. Valve adjusting screws.
8. Valve rod adjusting bracket.
9. Valve rod adjusting bracket pin.
10. Slide valve lever.
11. Inner slide valve.
12. Outer slide valve.
13. Outer slide valve rod.
14. Double lever.
15. Steering rod.
16. Piston rod.
17. Piston spring.
18. Piston.
19. Cylinder.
20. Cylinder covers.
21. Counter weight.
22. Air admission pipe..
23. Slide valve chest.
24. Slide valve lever pivot frame.
25. Holding bolts and nuts.
26. Engine room bulkhead.
27. Steering rod tube.
28. Bell crank.

PLATE VII.
LOCKING AND DISTANCE GEAR.

1. Support for crank case cover with securing screw.
2. Crank case cover.
3. Crank shaft friction discs.
4. Worm.
5. Crank shaft.
6. Worm wheel.
7. Worm gear spindle.
8. Spur gear pinion.
9. Spur gear.
10. Locking spindle.
11. One-tooth pinion.
12. Locking index.
13. Distance wheel.
14. Distance spindle.
15. Distance index.
16. Locking spindle spring.
17. Locking stud.
18. Unlocking stud.
19. Uncocking stud.
20. Uncocking arm.
21. Uncocking spindle.
22. Pawl connecting rod lever.
23. Pawl connecting rod.
24. Pawl.
25. Pawl spring.
26. Locking arm.
27. Locking arm brackets.
28. Locking arm guide.
29. Valve rod bracket.
30. Guide stud.
31. Cocking spring box.

Schwartzkopff Home Page

More Plates